Garmin 545s, just a taste
Geez, I’m so behind on testing (Cobra radios and Lowrance iWay are the ones half done, and there’s some I haven’t even started, sorry all!), I hesitate to get started on this Garmin 545s. On the other hand, the interest is great, myself included! Above is a backside shot showing the new two-way swivel bracket, and also the ports. Right is a BNC connector for an optional external antenna, middle is a connector for the still somewhat mysterious GXM 31 antenna, and left goes a cable that contains power leads, 2 sets of NMEA 0183 i/o leads, a set of CANet leads, and a power/data plug for the the dual frequency transducer. The unit is not quite as blue as the picture somehow came out, and the tooling is beautiful. The 545s manual is now online for more info, and I will try to show you what it can do as the week goes on (I’ve got a g2 Vision card too), though I probably won’t get it out on the water for a couple of weeks (and, by gorry, I’m going to finish those other units). Meanwhile I include the picture below as a reminder to everyone installing and reinstalling electronics this spring. Be very careful with your screens unless you’re positive that they’re not coated.
Share
Garmin makes wonderful user friendly products.
But you can not mount it on or near a wall because the plugs stick out too far in back.
Looks like every manufacturer has at least one stupid designer employed.