If you write comments, please register at TypeKey

... written for Panbo by Ben Ellison and posted on Jul 17, 2006

Flash

Like many blogs, we’ve had a lot of trouble with spam comments. For a while now, we haven’t even let comments go up without first inspecting them, which is a bit of a pain for commenter and inspector (me) alike. I’m pleased to announce that you can now use the TypeKey Authentication Service—which is free and reputable—to post comments immediately. Signing up only requires a name and e-mail address, and your deciphering one of those graphic code thingies that frustrate software spiders. Once acquired, your TypeKey name and password will work on many blogs created with Movable Type. Please register.

We are still allowing comments from unregistered, even anonymous posters, but we have to deal with hundreds of spams a day to make that freedom available. It is tempting to simply limit all comments to folks who are TypeKey registered.

Comments

Great idea!! Hope it saves you some time.
Charlie

Posted by: CharlieJ at July 18, 2006 12:25 AM | Reply

Excellent.

Posted by: GPSNavX at July 18, 2006 1:30 AM | Reply

Good show. Wish more blogs used it!

Posted by: yachtvalhalla at July 20, 2006 1:47 AM | Reply

I'm an installer/tech in Vancouver, Canada and Iv'e been around a few years. I've been installing a few Furuno FA150 AIS transponders and I'm having trouble with interfacing to both Raymarine E-series and Garmin 4212. I have had no problems interfacing to PC chart programs. It's my understanding that IEC 61162-2 is basically high speed NMEA, but I can't get either the Garmin or the Raymarine to recognize it. Has anyone tried this?
Just a comment on the Garmin 4000/5000 series, I was told by their techs that they only accept NMEA ver 2.3 or higher, which is causing other headaches for me, trying to get other info in.

I'm running the Garmin 504 4ft open array radar side by side with a Furuno 1944C Navnet 4 ft. open array radar. The picture on the Garmin is very impressive.

Posted by: ChrisM at August 21, 2007 9:22 PM | Reply

Leave a comment